IoT Enablers
What is A-Mote
A-MOTE is an intelligent hardware developed for the accurate and effortless measurement of environmental parameters. It pushes these values to the nearest routers or gateways and thereafter onto the cloud for further analysis. It is capable of interfacing and collecting data from multiple sensors at any given point of time. Sensors for measuring pressure, humidity, temperature, air quality, etc., can be attached to this device with minimal or no calibration.
What is LowZee
The LowZee is a 2.4GHz A-Mote module used for low-power, wireless sensor network with multi-protocol support and with higher radio efficency.
LowZee’s have the ability to host 6LoWPAN or Zigbee stacks. It allows users to load Contiki OS onto it and run appropriate protocol stack on top of it. Using its USB interface it can be connected to Beagle bone or UDO or Radxa or similar boards to quickly enable Zigbee and 6LowPan mode of Communication. Compared to existing A-Mote of similar capability LowZee’s are priced comparatively cheaper. LowZee’s could attain a line of sight range close to 800m under high humid climates and about 120m to 200m otherwise. Application areas of such LowZee’s are limitless. LowZee’s also consumes less power compared to its counter parts.
A-mote Features
- Hot swappable sensors
- A-MOTE will load the calibration values. The calibration data for all sensors are included in the firmware of the A-MOTE
- Extra sensors can be added to the A-MOTE by using a simple and cheap expanders
LowZee Features
- Bridges IoT devices to IoT network middleware.
- Hosts and IoT service enabled devices allow real-world interaction.
- Gateway supports all the services and protocols demanded by AIoTm middleware.
- Best suits streaming real-time applications
Bed Side Monitor Wireless Adaptor
Wireless Bed Side Monitor adaptor that operates over Zigbee or Wi-Fi. BSM adaptor can convert any Bed Side Monitors with RS232 port to a smart device. When the BSM adaptor is plugged in and configured to each make and model, the adaptor will extract data pertaining to the patient’s vitals from the monitor, and push the same wirelessly to the central server. It is a highly modular wireless device that could be powered from either micro-USB or Type-A male ports leaving no additional wires hanging around to power the device. BSM Adaptor is attached directly to RS-232 female port of the BSM. The device could stream data as per the pattern of data flow from the connected bedside monitor to remote server. Devices can either leverage existing Wi-Fi backbone infrastructure or a secure Zigbee based backbone network can be built using IoT backbone devices like routers and gateways
BSM Adapter
The healthcare industry holds a challenging environment. Hospitals are competing among themselves to offer better and more reliable care to patients at an affordable cost. Hospital staff are under tremendous pressure to keep up the quality of care given to patients considering the ever-increasing ageing population and more complex cases, whilst utilising the limited resources at their disposal. Vitals of critical patients need to be monitored and recorded constantly at every stage of their treatment cycle. This means a lot of manual effort to be exhorted at all times and human presence is required to monitor and manage potential emergencies that can build up at any point of time. Patients with critical vitals would need immediate care, and so any variations that go unnoticed would result in the failure of administering preventive measures
BSM UI
Provides a bird’s-eye view on all Gateways registered with the middleware.
Detailed accounts of Gateway activities can be monitored both visually and using textual data.
It is a scalable, distributed monitoring tool for high-performance computing systems.
Gateway locations are plotted in a geographical map where the admin has the privilege to add multiple gateways at a time
CONTACT US
Send Message
Have a requirement, a query or feedback? We would love to hear from you. And of course, revert back to you the soonest.
Marks Technology
Mon 09:00 am – 05:00 pm
Tue 09:00 am – 05:00 pm
Wed 09:00 am – 05:00 pm
Thu 09:00 am – 05:00 pm
Fri 09:00 am – 05:00 pm
Sat Closed
Sun Closed